Information
The System Information page includes the following sections. Click on the link to go to the corresponding section to learn more:
To go to the documentation for the previous section of System, see Configuration. To go to the documentation for next subsection in the System section, see Interfaces.
To access the Information page in the WAF management interface, on the left panel, under System, click Information.
To save configuration changes or edits you make to any features and options, you must click Save on the lower-right of the section or page where you are making changes. Click apply changes on the upper-left corner of the page, and then click OK. Your changes will not be stored if you do not properly save your changes.
Displays basic system hardware information.
| CPU |
Number of CPUs detected, CPU speed in gigahertz (GHz) and CPU model. |
| BIOS |
Information read from server BIOS. |
| Memory |
Available server (hardware) memory. |
| Uptime |
Time since the system was last started. |
| Localtime |
The system time. |
- CPU model:
-
Displays the CPU model.
- CPU speed
-
Displays the CPU speed in gigahertz (GHz).
- CPU(s)
-
Displays the number of CPU(s) detected.
- Architecture
-
Displays the architecture running. Eg. i386/32-bit or amd64/64-bit depending on the Web Security Manager version installed.
basic information about the Web Security Manager platform.
| Version |
Major and minor version information, e.g. |
| Architecture |
Architecture running. Eg. |
Detected devices like network interfaces and disk controllers.
| Device |
The device system id. |
| Description |
Device manufacturer and name. |
System disks available.
| Disk |
The disk id, e.g. |
| ID |
Disk identification information |
| Type |
The disk type, e.g. |
| Info |
Disk information like size, cylinders, etc. |